• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
PAINT THRUST  CONTROL
REMOVE  PILOTS  PITCH  AND  ROLL CONTROL  STICK

TM-55-1520-240-23-9 CH-47D Heilcopter Manual
Page Navigation
  302    303    304    305    306  307  308    309    310    311    312  
TM  55-1520-240-23-9 11-68 PAINT  THRUST CONTROL (Continued) 11-68 Dry  cleaning  solvent  (E162)  is combustible  and  toxic.  Avoid  contact with  skin,  eyes,  or  clothing.   Use only with  adequate  ventilation,  away from  open  flame.  In  case  of  contact, immediately flush  skin  or eyes  with water  for  at  least 15 minutes.   Get medical  attention  for eyes. Do  not  immerse  control  in  solvent. Damage  to  components  can  occur. 1. Clean  damaged  painted  areas of control  grip  (1) and  pivot block  (2).  Use  cloth  (E120)  moist with solvent (E162).   Wear gloves (E184.1).   Allow areas  to  dry. Polyurethane  paint  (E285.1)  is flammable and  toxic.  It can irritate  skin and  cause  burns.  Avoid  inhaling.  Use only with  adequate  ventilation.  Avoid contact  with  skin,  eyes,  or  clothing. Keep  away form  heat, sparks,  or open flame.  In  case  of  contact, immediately flush  skin  or  eyes  with  water for at  least  15  minutes.   Get  medical attention  for  eyes. 2. Apply  coat  of  black polyurethane  paint  (E285.1) (Task  2-350.1)  to  damaged  areas. INSPECT FOLLOW-ON MAINTENANCE: None END  OF  TASK 11-311







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.