TEST MAIN FUEL TANK AFTER INSTALLATION
Remove plug from port (11). Install two packings
(9 and 10) on valve (8). Install valve in port (Task
Remove cap from fitting (6) and plug from hose
(7). Hold fitting with wrench and connect hose.
Perform vent system flow test (Task 10-118) on
Perform test of pressure refueling system (Task
10-119) and fuel feed system (Task 10-120).
Refuel main tank (Task 1-51).
Check for leaks (Task 10-4).
Bleed fuel system (Task 10-121).
Perform operational check of affected fuel system
Close forward landing gear access panel (Task 2-2).
Close aft intertank pod panel (Task 2-188).
END OF TASK