TM 55-1520-240-23-7
9-100
INSTALL OVERHEAD PANEL PANELS
(Continued)
9-100
ELECT PANEL
6.
Install ELECT panel (46) as follows:
a.
Position panel (46) on panel (2). Tighten four
screws (47).
b.
Remove tape. Connect and solder five wires
(48) to three lamps (49). Remove tags.
c.
Remove tape. Connect 26 wires (50) to five
switches (51) by installing washers (52) and
screws (53). Remove tags.
INSPECT
NOTE
If no other panels are to be installed,
go to step 13.
9-394