TM 55-1520-240-23-7
9-100
INSTALL OVERHEAD PANEL PANELS
(Continued)
9-100
LIGHTING PANEL
4.
Install LIGHTING panel (26) as follows:
a.
Position panel (26) on panel (2). Tighten four
screws (27).
b.
Remove tape. Connect and solder five wires
(28) to three lamps (29). Remove tags.
c.
Remove tape. Connect and solder 16 wires
(30) to two potentiometers (31). Remove
tags.
d.
Remove tape. Connect nine wires (32) to two
switches (33) by installing washers (34) and
screws (35). Remove tags.
INSPECT
NOTE
If no other panels are to be installed,
go to step 13.
9-392