TM 55-1520-240-23-7
9-16
REMOVE DC POWER SUPPLY (TR) FAIL RELAY
(Continued)
9-16
2.
For No. 1 relay (3), tag nine wires (4). Disconnect
wires by removing seven screws (5), and
lockwashers (6). Use tags (E264).
3.
For No. 2 relay, tag 10 wires (4). Disconnect wire
by removing eight screws (5) and lockwashers
(6). Use tags (E264).
4.
Tape exposed ends of wires (4). Use tape
(E385).
5.
Remove two screws (7), washers (8), and relay
(3) from power distribution panel (9).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
9-55
