• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
REMOVE  DC  POWER  SUPPLY (TR) FAIL RELAY (Continued)
INSTALL DC  POWER  SUPPLY  (TR) FAIL RELAY (Continued)

TM-55-1520-240-23-7 CH-47D Heilcopter Manual
Page Navigation
  408    409    410    411    412  413  414    415    416    417    418  
TM  55-1520-240-23-7 9-17 INSTALL  DC  POWER  SUPPLY  (TR) FAIL RELAY 9-17 INITIAL  SETUP Applicable  Configurations: All Tools: Electrical  Repairer’s Tool  Kit, NSN 5180-00-323-4915 Materials: None Personnel  Required: Aircraft  Electrician Inspector References: TM  55-1520-240-23P NOTE Procedure  is  similar to  install  No.  1  or No.   2  dc  power  supply  TR  fail  relay except  as  noted  in  text.  No.   1  relay shown  here. 1. Position  fail  relay  (1),  X2  terminal  up  in  No.   1 power distribution  panel  (2). 2. Install  two  screws (3)  and  washers (4). 3. Remove  tape  from  ends of wires  (5). 4. For  No.   1  relay (1), connect  eight  wires (5)  by installing  seven  screws  (6)  and  lockwashers  (7). Remove  tags. 5. For  No.  2  relay, connect  10  wires (5) by  installing eight  screws (6)  and  lockwashers  (7).  Remove tags. 9-56







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.