TM 55-1520-240-23-7
9-159
DISASSEMBLE WINCH CONTROL GRIP (AVIM)
(Continued)
9-159
13.
Tag and unsolder two wires (21) from switch (22).
14.
Remove screw (23) from plate (24).
15.
Remove switch (22), plate (24) and bracket (25).
NOTE
Cargo hook release guard (E311,
APP E) must be installed on winch
control grips that do not have a raised
guard as part of the retainer and
guard assy (28).
16.
Remove three screws (27) from guard (28) and
cargo hook release switch guard (E311, APP
E) if installed.
17.
Remove guard (28) and bushing (29).
18.
Remove screw (30) from handle (8). Remove
plate (31).
19.
Remove two screws (32) from housing (33).
20.
Turn housing over. Tag and unsolder two wires
(34) from switch (35). Remove switch.
21.
Tag and unsolder three wires (36) from switch
(37). Remove switch and housing (33).
22.
Remove nut (38), two washers (39), switch (40),
arm (41), spacer (42), and screw (43) from plate
(31).
9-637