TM 55-1520-240-23-7
9-159
DISASSEMBLE WINCH CONTROL GRIP (AVIM)
(Continued)
9-159
1.
Remove four screws (1) and washers (2).
2.
Remove screw (3) and washer (4).
3.
Remove screw (5) and washer (6).
4.
Remove screw (7) from handle (8).
5.
Remove left half of handle (8).
6.
Remove pin (9) and trigger (10).
7.
Tag and unsolder 12 wires (11) from connector
(12).
8.
Remove four screws (13) and washers (14).
9.
Remove connector (12) and cover (15).
10.
Remove three screws (16) and washers (17).
11.
Remove cover (18).
12.
Tag and unsolder five wires (19) from switch (20).
9-636