REPLACE AFT TRANSMISSION MAIN OIL FILTER
Remove lockwire from pressure differential
indicator (6). Remove indicator. Remove two
packings (7 and 8) from indicator.
Flush bowl (2) with dry cleaning solvent (E162).
Remove deposits with cloth (E120) damp with
solvent (E162). Wear gloves (E186) and goggles.
Rigid tool could break and block holes.
Check that two holes in wall of indicator cavity
(9) are clear. Use lockwire (E231). Do not use a
rigid tool such as a drill bit.
Install two packings (7 and 8) on indicator (6).
Install indicator in bowl (2). Lockwire indicator to
bowl. Use lockwire (E231).
Position bowl (2) so that indicator button (10)
points straight up. Push in button to lock it down.
Install packing (5) on bowl (2).