TM 55-1520-240-23-5
6-146
INSTALL AFT TRANSMISSION OIL COOLER
(Continued)
6-146
3.
Install seven washers (7) and nuts (8) on short
studs (9). Torque nuts to 60 inch-pounds.
4.
Install baffle (10) on three long studs (11). Install
washers (12) and nuts (13) on studs. Torque
nuts to 60 inch-pounds.
5.
Install fan drive shaft (14) in transmission splines
(15).
6.
If cooler (3) is not a replacement remove drain
plug (16) and packing (17). Install plug and new
packing. Lockwire drain plug to plug (18) with
lockwire (E231).
7.
Remove two oil transfer tubes (19) and four
packings (20). Install tubes and new packings.
6-522