REPLACE AFT TRANSMISSION MAIN OIL FILTER
Do not install a used filter.
Check for packing (11) at each end of filter (4),
install new filter in bowl (2).
After tightening the filter bowl, the
pressure indicator may be in any
position as long as the indicator does
not touch the drip pan at any point. If
it does touch the drip pan, replace
the filter bowl.
Install bowl (2) and filter (4) in housing (3).
Tighten bowl by hand until it bottoms. Lockwire
bowl to housing. Use lockwire (E231).
Make sure drain valve (1) is closed.
Service aft transmission (Task 1-54).
Perform ground run (TM 55-1520-240-10).
Close left baffle under aft transmission (Task 2-2).
Close cargo ramp (Task 2-2).
END OF TASK