TM 55-1520-240-23-5
6-46
REMOVE FORWARD TRANSMISSION PACKAGE
(Continued)
6-46
1.
Fit four roller adapters (1) on two rails (1.1) of
trailer (1.2).
1.1.
With aid of helper, position adapter (2) on roller
adapters (1).
1.2.
Turn fitting (2.1) of each roller adapter (1)
clockwise until clamp (2.2) fits tightly against
rail (1.1).
DISCONNECT LOWER POINTS
2.
Disconnect oil temperature connector (3).
3.
Remove four mounting nuts (4) and washers (5)
from hydraulic pump (6).
4.
Disconnect pump (6), with gasket (6.1), by pulling
pump straight down. Pump shall hang by hoses
(7 and 8).
5.
Disconnect chip detector plug (9).
6.
Disconnect hoses (10 and 11) from left
servocylinder (12). Let fluid drain into container.
7.
Disconnect hoses (13 and 14) from right
servocylinder (15). Drain fluid into container.
6-150