TM 55-1520-240-23-5
6-45
INSTALL NO. 1 FLIGHT CONTROL HYDRAULIC PUMP DRIVE SHAFT SEAL
(Continued)
6-45
6.
Coat packing (5) with oil (E254). Install packing
on retainer (1).
7.
Apply light coat of grease (E190) to lip of seal
(3). Apply light coat of oil (E254) to surface of
shaft (6). Install retainer (1) on shaft.
8.
Install three washers (7) and nuts (8). Torque
nuts to 20 inch-pounds.
INSPECT
FOLLOW-ON MAINTENANCE:
Install No. 1 flight control hydraulic pump (Task 7-27).
Install forward transmission drip pan (Task 2-3).
END OF TASK
6-148