• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
REPAIR COMPOSITE WEATHER-PROTECTIVE  COVER  (AVIM) (Continued) - TM-55-1520-240-23-4_796
REPAIR COMPOSITE WEATHER-PROTECTIVE  COVER  (AVIM) (Continued) - TM-55-1520-240-23-4_798

TM-55-1520-240-23-4 CH-47D Heilcopter Manual
Page Navigation
  766    767    768    769    770  771  772    773    774    775    776  
TM  55-1520-240-23-4 5-137.1 REPAIR  COMPOSITE WEATHER-PROTECTIVE COVER  (AVIM) (Continued) 5-137.1 104. Cover each  side  of  repair  as  follows: a. Apply  coat  of  adhesive  to  top  of  laminate piece  (42) or core  plug  (38),  as  applicable, and  to  surrounding  area  of cover  (1)  within 0.5 inch of  finish  removal  line. b. Remove  protective  film  from  each  side  of two fiberglass  laminate  pieces  (43).  Carefully  pull at  right  angle  to  direction  of  fibers. NOTE Laminate  pieces must  be  installed  so that fiber orientation  between  the  two pieces will  be  at 45º  when  the  pieces are  installed. c. Coat  underside  of  one  laminate  piece  (43) with  adhesive.  Center piece  over  repair  area and  press  in  place. d. Apply  coat  of  adhesive  to  top  of  installed piece  (43) and  underside  of  second  piece. Position  second  piece  on  first  piece  and press  it in  place. 105. Bond  and  cure  repair.  (Refer  to  steps  110  thru 122.) 5-771







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.