PLACE SWASHPLATE IN SERVICE (Continued)
Install sling (T14) (16) on swashplate (1) as
Position lifting eye (17) over swashplate (1).
Remove three quick-release pins (18) from
Position three links (19) outside of swashplate
Install three quick-release pins (18).
Attach hoist (21) to sling (T14) (16).
Swashplate is heavy and can injure
personnel if it drops. Swashplate must
be supported by hoist and moved
carefully to prevent injury.
Lift and support swashplate (1).
Fill swashplate (1) with grease (E190) while
turning rotating ring (22) one full circle. Fill until
grease appears all around stationary grease seal
(23). Use hand lubricating gun.
Wipe off excess grease around stationary grease
seal (23). Use cloth (E120).
Install swashplate (Task 5-132 or 5-133).
END OF TASK