REPAIR FORWARD SWASHPLATE STATIONARY RING (AVIM)
Blend repair damage on stationary ring (1) 0.005
inch to 0.020 inch in depth. Blend smooth with
minimum blend radius of 1 inch. Use abrasive
paper (E10). Rework shall not exceed 0.020
inch in depth.
Alodine (E65) is an oxidizer. Discard
cloths which contain this material in
separate container. If discarded with
cloths contaminated with acetone,
MEK, or other organic solvents,
combustion can result. In case of
contact, immediately flush skin or eyes
with water for at least 15 minutes.
Get medical attention for eyes.
Apply alodine (E65) to repaired area of ring (1).
Wear gloves (E184.1).
Apply one coat of wash primer (E302) to repaired
area of ring (1). Wear gloves (E184.1). Allow
primer to dry for 30 minutes.
Apply one coat of epoxy primer (E292.1) to
repaired area of ring (1). Wear gloves (E184.1).
Allow primer to dry for 1 hour.
END OF TASK