TM 55-1520-240-23-4
5-126.1.1 REPLACE SWASHPLATE LOWER SEAL (AVIM) (Continued)
5-126.1.1
11.
Coat lip of seal (11) and running surface (12) on
stationary ring (3) with grease (E190).
12.
Install rotating ring assembly (4) on stationary
ring (3). Use a mallet, if needed.
WARNING
Wear Kevlar gloves (E187) when
handling heated parts.
13.
Heat retainer (12) to 170 to 190 F (77 to
88 C). Use an oven.
14.
Install seal (1A) in retainer (1C). Use a phenolic
drift and mallet.
15.
Install ring (1B) on stationary ring.
16.
Install retainer (1C) with seal (1A) on stationary
ring.
17.
Install upper retainer (2) and seal (1) on
stationary ring (3) (Task 5-125.1).
5-705