• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
ASSEMBLE  FORWARD  LANDING  GEAR (Continued)
INSTALL FORWARD LANDING GEAR (Continued

TM-55-1520-240-23-3 CH-47D Heilcopter Manual
Page Navigation
  11    12    13    14    15  16  17    18    19    20    21  
TM  55-1520-240-23-3 3-6 INSTALL  FORWARD  LANDING GEAR 3-6 INITIAL  SETUP Applicable  Configurations: All Tools: Aircraft Mechanic’s  Tool  Kit,  NSN  5180-00-323-4692 Floor  Hoist Torque  Wrench,  0  To  600  Foot-Pounds Socket,  1-3/16  Inch Socket,  1-3/8  Inch Socket,  1-1/16  Inch Extension,  9  Inch Eddy  Current  Inspection  Unit Materials: Antiseize  Compound  (E75) Cloth  (E120) Dry  Cleaning  Solvent  (E162) Gloves  (E186) Personnel  Required: Medium  Helicopter Repairer (2) Inspector References: Task  2-8 Task  3-3 Task  7-7 Task  7-70 Task  7-72 Task  7-330 Task  10-56 Task  10-88.2 TM  55-1520-240-23P TM  1-1520-253-23 INSTALL  LEFT  OR  RIGHT  GEAR Dry  cleaning  solvent  (E162)  is flammable  and  gives  off  toxic fumes. It may  irritate  skin  and  cause  burns. Use  only  in  well-ventilated  area  away from  heat  and  open  flame.   In  case of  contact,  immediately  flush  skin or  eyes  with  water  for at  least  15 minutes.   Get  medical  attention  for eyes. NOTE To  convert a  forward  landing  gear to an  opposite  assembly,  refer  to  Task 3-3. 1. Clean  landing  gear support structure  (1) with solvent  (E162).  Wear  gloves  (E186). NO  BREAK  - WORK  HARDER NO  BREAK  - WORK  HARDER NO  BREAK  - WORK  HARDER NO  BREAK  - WORK  HARDER NO  BREAK  - WORK  HARDER NO  BREAK  - WORK  HARDER NO  BREAK  - WORK  HARDER 3-18







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.