TM 55-1520-240-23-10
16-59.7
INSTALL AN/ALE-47 PROGRAMMER
16-59.7
INITIAL SETUP
Applicable Configurations:
All
Tools:
Electronic Equipment Tool Kit,
NSN 5180-00-064-5178
Materials:
None
Personnel Required:
Avionics Mechanic
Inspector
Equipment Condition:
Battery Disconnected (Task 1-39)
Electrical Power Off
Hydraulic Power Off
AN/ALE-47 Safety Switch Pin Installed
(TM 1-1520-240-10)
1.
Position AN/ALE-47 programmer (1) onto
mounting brackets (2) and secure in place with
four fasteners (5).
2.
Perform bonding check of electrical components
per Task 16-59.28.
3.
Remove caps and connect two electrical
connectors (3 and 4) to J1 and J2 receptacles on
AN/ALE-47 programmer (1). Remove tag.
INSPECT
FOLLOW-ON MAINTENANCE:
Perform operational check of countermeasures
dispenser system (TM 55-1520-240-T).
Install cabin acoustic blanket (Task 2-210).
END OF TASK
Change 1
16-250.17