TM 55-1520-240-23-10
16-59.3
INSTALL AN/ALE-47 DIGITAL CONTROL DISPLAY UNIT (DCDU)
16-59.3
INITIAL SETUP
Applicable Configurations:
All
Tools:
Electronic Equipment Tool Kit, NSN
5180-00-064-5178
Materials:
None
Personnel Required:
Avionics Mechanic
Inspector
Equipment Condition:
Battery Disconnected (Task 1-39)
Electrical Power Off
Hydraulic Power Off
AN/ALE-47 Safety Switch Pin Installed (TM
1-1520-240-10)
Miscellaneous Control Panel Removed (Task 16-59.4)
1.
Position DCDU (3) in center console (1).
2.
Perform bonding check of electrical components
per Task 16-59.28.
3.
Remove cap and connect electrical connector (4)
to J1 receptacle on DCDU (3). Remove tag.
4.
Tighten four fasteners (2).
INSPECT
FOLLOW-ON MAINTENANCE:
Miscellaneous control panel installed (Task 16-59.5).
Perform operational check of countermeasures
dispenser system (TM 55-1520-240-T).
END OF TASK
Change 1
16-250.13