TM 55-1520-240-23-10
16-59.5
INSTALL AN/ALE-47 MISCELLANEOUS CONTROL PANEL
16-59.5
INITIAL SETUP
Applicable Configurations:
All
Tools:
Electronic Equipment Tool Kit,
NSN 5180-00-064-5178
Materials:
None
Personnel Required:
Avionics Mechanic
Inspector
Equipment Condition:
Battery Disconnected (Task 1-39)
Electrical Power Off
Hydraulic Power Off
AN/ALE-47 Safety Switch Pin Installed
(TM 1-1520-240-10)
1.
Remove blank panel if installed.
2.
Position miscellaneous control panel (4) on
console (1).
3.
Perform bonding check of electrical components
per Task 16-59.28.
4.
Remove cap and connect electrical connector (2)
to J1 receptacle on miscellaneous control panel
(4). Remove tag.
5.
Tighten two fasteners (3).
INSPECT
FOLLOW-ON MAINTENANCE:
Perform operational check of countermeasures
dispenser system (TM 55-1520-240-T).
END OF TASK
Change 1
16-250.15