TM 55-1520-240-23-10
16-26
INSTALL FORWARD OR AFT CARGO HOOK THREADED INSERTS (AVIM)
(Continued)
16-26
INSTALL 6-32 INSERT IN REAR COVER
22.
If insert hole (11) in rear cover (7) has sealant
inside rear cover, scrape sealant away.
23.
Clean any debris from inside and around insert
hole (11) at both inside and outside rear cover
(7). Use dry cleaning solvent (E162) and low
pressure compressed air. Wear gloves (E184.1)
and goggles.
24.
Coat insert hole (11). Use sealant (E335) and
brush (E86). Wear gloves (E184.1).
25.
Install insert (12) on tool TKNC06 (13).
26.
Install insert (12) in rear cover (7) with tool (13)
by rotating bottom of tool clockwise until insert
seats in cover. Install insert while sealant is wet.
27.
Depress handle of tool (13) and let spring-loaded
mechanism drive down keys (15). Repeat as
necessary to drive down keys.
28.
Turn bottom of tool (13) counterclockwise and
remove tool from insert (12).
16-138