TM 55-1520-240-23-10
16-27
ASSEMBLE FORWARD OR AFT CARGO HOOK (AVIM)
(Continued)
16-27
NOTE
All mating surfaces must be clean
before assembly. Use solvent
(E413.4) to clean Teflon bearings.
Use acetone (E20) to clean other
components. Use cloths (E120).
Wear gloves (E184.1).
1.
Coat mount surface of front plate support hole
(1) with primer (E292). Wear gloves (E184.1).
2.
Align holes of shaft support (2) and front plate
(3). Press shaft support in front plate while
primer is wet. Use arbor press.
3.
Install six rivets (4).
4.
Coat mount surface of three bushing holes (5),
pin boss hole (6), and latch bearing hole (7), with
primer (E292). Wear gloves (E184.1).
5.
Press in three bushings (8, 9, 10), pin boss (11),
and latch bearing (12) while primer is wet. Use
arbor press.
16-142