TM 55-1520-240-23-10
16-26
INSTALL FORWARD OR AFT CARGO HOOK THREADED INSERTS (AVIM)
16-26
INITIAL SETUP
Applicable Configurations:
All
Tools:
Machine Shop Set, NSN 4920-00-405-9279
Insert Installation Tool, TD428L
Insert Installation Tool, TD1032L
Insert Installation Tool, TKNC06
Source of Low Pressure Compressed Air
Materials:
Brush (E86)
Cloths (E120)
Dry Cleaning Solvent (E162)
Gloves (E184.1)
Sealant (E335)
Tongue Depressor (E424)
Epoxy Primer (E292)
Parts:
Inserts
Personnel Required:
Machinist
Inspector
General Safety Instructions:
Dry cleaning solvent (E162) is
flammable and toxic. It can irritate
skin and cause burns. Use only in
well-ventilated area, away from heat
and open flame. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
Sealant (E335) is toxic and can
cause dermatitis. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
16-134