• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
REMOVE  WINCH WIRE  ROPE  CABLE
REMOVE  WINCH  WIRE  ROPE  CABLE (Continued) - TM-55-1520-240-23-10_345

TM-55-1520-240-23-10 UH-1H/V and EH-1H Aircraft Manual
Page Navigation
  306    307    308    309    310  311  312    313    314    315    316  
TM  55-1520-240-23-10 14-10 REMOVE  WINCH  WIRE  ROPE  CABLE (Continued) 14-10 2. Reel  out  all  wire  rope  (1) (TM  55-1520-240-T). End  cover (2) shall  be  visible  through  opening in  winch  (3). 3. Shut down  electric and  hydraulic power. 4. Remove  end  cover  (2),  retaining  ring  (4),  and locking  sleeve  (5). 5. Remove  ball  end  (6) from  drum  (7). 6. Remove  four bolts  (8),  and  washers  (9),  from winch  (3). 7. Disconnect  four  hydraulic  lines  (10).   Use container and  cloths (E120) for spilled  fluid.  Cap lines. 8. Disconnect  electrical  plug  (11). 9. Reposition  winch  (3) so  back  of  winch  faces aft. Position  wooden  block  (12) under winch. 10. Cut  lockwire  and  remove  two  screws  (13). 11. Remove  bracket  (14),  four washers (15),  and  two rollers  (16) from  posts  (17). 14-36







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.