TM 55-1520-240-23-9
11-227
REMOVE AFT LCT YOKE
(Continued)
11-227
4.
Remove cotter pin (8), nut (9), washers (10), and
bolt (11) attaching connecting link (12) to yoke
(5).
5.
Remove cotter pin (13), nut (14), washers (15),
and bolt (16) attaching LCT actuator (17) to yoke
(5). Have helper support swashplate (18).
6.
Remove support block (6) and gently lower yoke
(5).
7.
Install bolts (11 and 16), washers (10 and 15),
and nuts (9 and 14) back in yoke (5).
8.
Remove seven screws (19) and washers (20).
9.
Remove two screws (21), four cable clamps (22)
and two spacers (23).
10.
Remove bulkhead pocket (24).
11-886
