REMOVE AFT LCT YOKE
There may be two different five
digit codes marked on bolt P/N
BACB30ST10-40. The five digit code
81996 is not the manufacturers
CAGE code. If so marked the number
81996 identifies the part as having
been manufactured in accordance
with a government Technical Data
Identify the five digit manufacturers
code or manufacturers name on the
head of the bolt. If the bolt head
is marked with one of the CAGE
codes or manufacturers name listed
below, the BACB30ST10-40 bolt is
NO BREAK - WORK HARDER
1. CAGE code 84256 (Avibank
2. CAGE code 77272 (Boeing).
Remove and replace any
unserviceable bolts with serviceable
BACB30ST10-40 bolts from the
Positive retention bolts are installed
in upper controls. Bolts have a pawl
which prevents nut or bolt removal
unless pawl is depressed (Task 1-13).
Attaching bolts, washers and nuts will
be temporarily installed after removing
connecting link and actuator.
Remove 13 screws (1) and washers (2) from
forward bulkhead (3).
Cut cable straps (4) on yoke (5).
Support yoke (5) with block (6) (or equivalent)
under lug (7).