TM 55-1520-240-23-9
11-200
REMOVE FORWARD RIGHT UPPER BELLCRANK
(Continued)
11-200
NOTE
Attaching bolt, washers, and nut will
be temporarily installed after removing
links and bellcrank.
NOTE
If a crack in the second stage
connecting link, bellcrank, or support
is suspected during removal, refer to
TM 1-1520-253-23.
1.
Tag second stage connecting link (1). Remove
cotter pin (2), nut (3), two washers (4), and bolt
(5) from forward right bellcrank (6). Disconnect
link and tie away from bellcrank. Use twine
(E433).
2.
Install bolt (5), two washers (4), and nut (3)
loosely in bellcrank (6).
3.
Tag servocylinder connecting link (7). Remove
cotter pin (8), nut (9), two washers (10), and bolt
(11) from bellcrank (6). Disconnect link and tie
away from bellcrank. Use twine (E433).
4.
Install bolt (11), two washers (10), and nut (9)
loosely in bellcrank (6).
5.
Remove cotter pin (12), nut (13), two washers
(14), and bolt (15) from support (16). Remove
bellcrank (6) from support.
6.
Install bolt (15), two washers (14), and nut (13)
loosely in support (16).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
11-804
