TM 55-1520-240-23-9
11-143
ASSEMBLE PITCH, ROLL OR YAW SPRING ASSEMBLY (AVIM)
(Continued)
11-143
Epoxy primer (E292) is flammable
and toxic. It can irritate skin and
cause burns. Use only with adequate
ventilation, away from heat and
open flame. Avoid contact with skin
eyes, or clothing. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
Dry cleaning solvent (E162) is
combustible and toxic. Avoid contact
with skin, eyes, or clothing. Use
only with adequate ventilation, away
from open flame. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
1.
Clean bearing (3) and bearing surface with dry
cleaning solvent (E162). Use cloths (E120).
Wear gloves (E184.1) and goggles.
2.
Apply coat of epoxy primer (E292) on housing (1)
bearing surface (2). Install bearing (3) in housing
while primer is wet. Use arbor press. Use cloth
(E120) to remove excess primer. Wear gloves
(E184.1) and goggles.
3.
Stake bearing (3) (TM 55-1500-322-24) in
housing (1). Use roller staking tool.
11-610
