TM 55-1520-240-23-9
11-10.1
INSPECT ALBI PAINT ON BELLCRANKS AND IDLERS
11-10.1
INITIAL SETUP
Applicable Configurations:
With 26
Tools:
As Required
Materials:
As Required
Personnel Required:
Inspector
References:
Task 11-7
Task 11-10
Equipment Condition:
As Required
1.
Inspect damage through the zinc chromate
primer to the bare metal in accordance with
Tasks 11-7 and 11-10.
2.
Inspect ALBI paint damage where the zinc
chromate primer is showing. Voids in the ALBI
paint may not exceed 0.30 by 0.30 inch square.
Voids in ALBI paint must be separated by 0.30
inch of undamaged paint, and a minimum
of 50 percent of the clevis areas shall have
undamaged ALBI paint.
FOLLOW-ON MAINTENANCE:
Repair finish of bellcranks and connecting links with
26 (Task 11-14.1).
END OF TASK
11-46
