TM 55-1520-240-23-9
11-116
DISASSEMBLE, INSPECT AND REPAIR ROLL VISCOUS DAMPER (1025-820)
(AVIM)
(Continued)
11-116
16.
Tap thread end of vane shaft (19). Remove shaft
from case (1). Use soft faced hammer.
17.
Push pin (20) from end of shaft (19). Remove
stop (21) from end of shaft.
18.
Remove valve (22) from shaft (19). Turn
counterclockwise.
19.
Remove two packings (23) from valve (22).
20.
Remove packing (24) from case (1).
21.
Remove four screws (25) from nameplate (26).
Remove nameplate from case (1).
11-552