TM 55-1520-240-23-9
11-78
ASSEMBLE COPILOT’S COCKPIT CONTROL ASSEMBLY
(Continued)
11-78
167.
Torque eight nuts (167, 171, 179, 183, 188, 192,
200, and 204) to 30 to 45 inch-pounds.
168.
Install eight cotter pins (346, 347, 348, 349, 350,
351, 352, and 353).
169.
Check eight bolts (164, 168, 176, 180, 185, 189,
197, and 201). Bolts shall not rotate with torque
less than 10 inch-pounds. There shall be no
axial looseness. If bolt rotates or is loose, add
washer under nut and repeat steps 167 and 168.
INSPECT
FOLLOW-ON MAINTENANCE:
None
END OF TASK
11-407
