TM 55-1520-240-23-9
11-76
DISASSEMBLE COPILOT’S COCKPIT CONTROL ASSEMBLY
(Continued)
11-76
REMOVE AND DISASSEMBLE YAW BELLCRANK
63.
Remove cotter pin (187), nut (188), two washers
(189), and bolt (190) from support (191).
64.
Tag and remove yaw bellcrank (139) from
support (191) through access (192).
65.
Remove two bearings (193) and spacer (194)
from bellcrank (139).
66.
Remove eight bushings (196) from bellcrank
(139).
67.
Remove two bushings (196) from support (191).
REMOVE AND DISASSEMBLE PITCH AND ROLL
INPUT SOCKET
68.
Remove cotter pin (197), nut (198), two washers
(199), and bolt (200), from bellcrank (186) in
support (191).
69.
Tag and remove socket (154) from bellcrank
(186).
70.
Remove two bearings (201), two bushings (202),
and spacer (203) from socket (154).
REMOVE AND DISASSEMBLE ROLL INPUT
BELLCRANK
71.
Remove cotter pin (204), nut (205), two washers
(206), and two bolts (207) from support (191).
72.
Tag and remove roll input bellcrank (186) from
support (191).
73.
Remove seven bushings (208), retainer (209),
and nut (210) from bellcrank (186).
11-355
