TM 55-1520-240-23-9
11-76
DISASSEMBLE COPILOT’S COCKPIT CONTROL ASSEMBLY
(Continued)
11-76
37.
Remove retainer (98) from shaft (99).
38.
Slide right pedal (10) from shaft (99).
39.
Remove two bearings (100) and bushings (101)
from pedal (10).
40.
Remove cotter pin (102), nut (103), two washers
(104), and bolt (105) from post (24). Remove
shaft (99) from post. Use gun heater.
41.
Remove cotter pin (106), nut (107), three
washers (108), and bolt (109) from post (24).
Remove lever (23) from post.
42.
Remove two nuts (110), four washers (111), and
two bolts (112) from lever (23). Remove channel
(113) from lever.
43.
Remove bushing (114) from lever (23).
44.
Remove pin (115), spring (116), and bushing
(117) from post (24).
45.
Remove cotter pin (118), nut (119), two washers
(120), and pin (121) from post (24).
46.
Remove cotter pin (122), nut (123), two washers
(124), and bolt (26) from post (24).
DISASSEMBLE LEFT AND RIGHT PEDAL ARMS
47.
Remove three nuts (125), five washers (126),
stop (127), and three bolts (128) from right arm
(27). Remove plate (129) from arm.
11-352
