TM 55-1520-240-23-9
11-279
BENCH TEST AFCS COCKPIT CONTROL DRIVE ACTUATOR (CCDA) (AVIM)
(Continued)
11-279
57.
Move output arm (16) to full clockwise position.
58.
Set CCDA BRAKE switch (14) to 0.
59.
Set CCDA CMD switch (26) to CCW. Check
output arm (16) moves to full counterclockwise
position. Time output arm to reach full
counterclockwise position. Time shall be 80 to
110 seconds.
INSPECT
END TRIM MOTOR TEST (PITCH)
60.
Set CCDA BRAKE switch (14) to 1.
61.
Move output arm (16) to center position.
62.
Set TESTER POWER switch (3) and AFCS
POWER switches (9 and 10) to OFF.
63.
Disconnect plug (1) from receptacle (2).
64.
Shut down AFCS bench test set 145G008-1 (TM
55-4920-430-13).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
11-1167
