TM 55-1520-240-23-9
11-278.3
ASSEMBLE ROLL ERECT CUTOUT RELAY ASSEMBLY
(Continued)
11-278.3
INSTALL RELAY
4.
Position heat shrinkable tubing (E431) on four
wires (8).
5.
Solder wires (8) to relay terminals (9). Remove
tags.
6.
Slide tubing (E431) over terminals (9). Shrink
tubing. Use gun type electric heater.
7.
Position relay (10) and two spacers (11) in
support (2). Install two screws (12) and nuts (13).
INSTALL CONNECTOR
8.
Connect five wires (14). Use contact
insertion/removal tool. Remove tags.
9.
Position connector (15) on support (2). Install
four screws (16) and nuts (17).
INSPECT
FOLLOW-ON MAINTENANCE:
None
END OF TASK
11-1154
