TM 55-1520-240-23-8
10-6
REMOVE MAIN FUEL TANK
(Continued)
10-6
6.
Disconnect electrical connector (11).
6.1.
Disconnect hook (11.1) from the lanyard on
electrical connector (11).
Do not allow elbow or fittings to
turn when disconnecting fuel hoses
from fittings on aft access panel.
Otherwise, access door fittings can
fail and cause fuel blockage.
7.
Hold fitting (12) with wrench and disconnect hose
(13). Catch spilled fuel. Use grounded container.
Remove conical seal (13.1). Plug hose and cap
fitting.
8.
Hold fitting (14) with wrench and disconnect hose
(15). Plug hose and cap fitting.
9.
Hold tee (16) with wrench and disconnect hose
(17). Remove conical seal (17.1). Plug hose
and cap tee.
10.
Remove four nuts (18), washers (19) and bolts
(20).
11.
Slide elbow (21) aft into adapter (22). Remove
gasket (23).
12.
Remove four nuts (24), washers (25), and bolts
(26).
13.
Remove elbow (21), tee (16), and gasket (27).
14.
Cover holes in flanges (28 and 29). Use barrier
material (E80) and tape (E388).
10-41
