TM 55-1520-240-23-8
10-119
TEST PRESSURE REFUELING SYSTEM FOR LEAKS
(Continued)
10-119
28.
Remove plug from hose (3). Hold fitting (2) with
wrench and connect hose.
29.
Remove eight nuts (11), bolts (13) and washers
(12). Slide manifold (14) and gaskets (15 and
16) forward.
30.
Remove two plates (18 and 21) and two gaskets
(17 and 20).
31.
Slide manifold (14) and gaskets (15 and 76)
aft and install eight bolts (13), nuts (11), and
washers (12).
32.
Repeat steps 20 thru 22 on No. 2 main fuel tank.
33.
Remove four bolts (6), nuts (4), and washers (4).
Slide tube (7) and gasket (8) aft and remove
gasket (9) and plate (10).
34.
Slide tube (7) and gasket (8) forward. Install four
bolts (6), nuts (4), and washers (5).
35.
Repeat steps 24 and 25 on No. 2 forward fuel
tank.
FOLLOW-ON MAINTENANCE:
Refuel helicopter (Task 1-51).
Bleed fuel system (Task 10-121).
Perform operation check of fuel system (TM
55-1520-240-T).
Install aft intertank pod panel (Task 2-188).
Close forward landing gear access panel (Task 2-2).
END OF TASK
10-520
