TM 55-1520-240-23-8
10-108
INSTALL NO. 2 FUEL SYSTEM PRESSURE SWITCH (RIGHT SIDE)
10-108
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanics Tool Kit, NSN 5180-00-323-4692
Materials:
None
Parts:
Packing
Personnel Required:
Medium Helicopter Repairer
Inspector
References:
TM 55-1520-240-23P
General Safety Instructions:
All regulations and instructions
for handling fuels shall be strictly
observed.
1.
Remove plug from tee (1).
2.
Install nut (2) and packing (3) on switch (4).
3.
Hold tee (1) with wrench. Install switch (4) on tee
(1). Use wrench on flats (5).
4.
Tighten nut (2).
5.
Connect cable plug (6) to switch (4).
INSPECT
FOLLOW-ON MAINTENANCE:
Perform test of fuel feed system (Task 10-120).
Perform operational check of No. 2 fuel system (TM
55-1520-240-T).
END OF TASK
10-476