TM 55-1520-240-23-8
10-57
MAIN TANK (NO. 2 SYSTEM) FUEL LEVEL SHUTOFF VALVE REMOVAL
(Continued)
10-57
NOTE
Index numbers 1 through 6 not used.
1.
Disconnect hose connector (9) from inboard
fitting on manifold (10). Remove conical seal (8)
from hose fitting. Plug the hose.
2.
Remove lockwire (18) and loosen ring nut (19) at
the bottom of elbow (17). Use a strap wrench.
3.
Remove four bolts (16), nuts (14), and washers
(15) from each end of tube (12).
4.
Slide the fitting at the forward end of cross fitting
(7) aft. Remove tube (12), with gaskets (11),
from between the cross fitting and adapter (13).
Use a grounded container to catch spilled fuel.
Wear gloves (E184.1).
5.
Remove four bolts (20), nuts (22), and washers
(21) from each of the two flanges on manifold
(10). Remove the clip of hose clamp (24) from
the lower flange.
6.
Carefully lift the manifold (10), with gaskets (23),
cross fitting (7), and elbow (17) as an assembly
up and back from fitting (25) and forward fuel
tank fittings (19). Use a grounded container to
catch spilled fuel. Wear gloves (E184.1).
7.
Plug all component openings.
10-292
