INSTALL MAIN TANK (NO. 1 SYSTEM) FUEL LEVEL SHUTOFF VALVE (Continued)

INSTALL MAIN TANK (NO. 1 SYSTEM) FUEL LEVEL SHUTOFF VALVE (Continued) - TM-55-1520-240-23-8_304

INSTALL MAIN TANK (NO. 1 SYSTEM) FUEL LEVEL SHUTOFF VALVE (Continued) - TM-55-1520-240-23-8_306

TM-55-1520-240-23-8 CH-47D Heilcopter Manual
Page Navigation
285

TM 55-1520-240-23-8 10-56.1 INSTALL MAIN TANK (NO. 1 SYSTEM) FUEL LEVEL SHUTOFF VALVE (Continued) 10-56.1 9. Position manifold (18). Install eight bolts (22), washers (23), and nuts (24). 10. Remove plug from hose (25). Install conical seal (25.1). Install hose on manifold (18). 11. Position hose clamp (26). Install bolt (27), two washers (28), and nut (29). 12. Position gasket (30). NOTE Tube (17) is not symmetrical. Make sure that the upper nut on the landing gear mount remains accessible when installing the tube. 13. Maneuver tube (17), fitting (31), and elbow (16) into position on manifold (18) and fittings (19). 14. Install four bolts (32), washers (33), and nuts (34). Do not use strap wrench or over-tighten ring nuts. Failure of the breakaway fittings may occur. 15. Hand tighten four ring nuts (35) and lockwire. Use lockwire (E231). 10-289

Privacy Statement
Press Release
Contact