TM 55-1520-240-23-8
10-48.3
REMOVE CAPTIVE BREAKAWAY FITTING
10-48.3
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanic’s Tool Kit, NSN 5180-00-323-4692
Grounded Container, 2 Quart or Equivalent
Materials:
None
Personnel Required:
Medium Helicopter Repairer
Equipment Condition:
Battery Disconnected (Task 1-39)
Electrical Power Off
Helicopter Grounded (Task 1-29)
Forward Landing Gear Door Opened (Task 2-2) or Aft
Intertank Pod Panel Lowered (Task 2-185)
Affected Tank Defueled and Crossover Valves Closed
(Task 10-34 or 10-35)
Main Fuel Tank Forward Access Door Removed
(Task 10-51) or Main Fuel Tank Aft Access Door
Removed (Task 10-54)
NOTE
Procedure is the same to remove
captive breakaway fitting from any
fuel tank access door. Main fuel tank
forward access door is shown here.
1.
Remove six screws (1) and washers (2).
2.
Remove fitting (3) and packing (4) from access
door (5).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
10-243
