TM 55-1520-240-23-8
10-28
REMOVE AFT FUEL TANK
(Continued)
10-28
6.
Hold fitting (13) with wrench and disconnect hose
(14). Cap fitting and plug hose.
7.
Position padded support (15) at side of tank
(16). Top of support should be approximately 24
inches below bottom of fuselage.
8.
With aid from helper, support tank (16). Remove
17 bolts (17) and washers (18).
9.
Remove four bolts (19) and washers (20).
10.
Lower tank (16) on hinge (21) onto padded
support (15).
11.
Cover holes in flange of fitting (22) and adapter
(5) of elbow (6). Use barrier material (E80) and
tape (E388).
10-134
