TM 55-1520-240-23-8
10-22
TEST MAIN FUEL TANK AFTER INSTALLATION
(Continued)
10-22
17.
Check inside of filler adapter (13) as follows:
a.
Remove six bolts (29) and washers (30),
adapter (13), and gasket (31).
b.
Remove three screws (32). Remove packing
(33).
c.
Check sealing surfaces between cell (34) and
pod (35).
d.
Coat packing (33) with petrolatum (E274).
Install packing carefully in annular groove of
cell flange (36). Make sure packing is not
disturbed during positioning of fuel cell (34)
in pod (35).
e.
Align hole (37) in cell (34) with hole (38) in
pod (35). Install three screws (32).
f.
Position gasket (31) and filler adapter
assembly (13). Install six bolts (29) and
washers (30). Torque bolts to 60 to 80
inch-pounds.
g.
Repeat steps 13 and 14.
10-97
