TM 55-1520-240-23-7
9-129.2
ASSEMBLE MASTER CAUTION PANEL (AVIM)
(Continued)
9-129.2
1.
Position terminal (32) and connector (33) on
housing (7). Install four screws (30) and nuts (31)
in terminal (32) and connector (33).
2.
Position connectors (28 and 29) on housing (7).
Install eight screws (27) in two connectors (28
and 29).
3.
Position brackets (26) on housing (7). Install four
screws (24) and nuts (25) in brackets.
4.
Position pin connector (23) on bracket (26).
Install two screws (21) and nuts (22) in pin
connector.
5.
Position brackets (20) on housing (7). Install four
screws (18) and nuts (19) in brackets.
6.
Position pin connectors (17) on brackets (20).
Install eight screws (15) and nuts (16) in pin
connectors.
7.
Remove each circuit card board (14) from static
free bag.
8.
Remove tag and install circuit card boards (14)
into housing (7).
9.
Position top cover (13) on housing (7). Install six
screws (11) and nuts (12) in cover.
10.
Position bottom cover (10) on housing (7). Install
six screws (8) and nuts (9) in cover.
11.
Position light housing (6) in housing (7).
12.
Install 16 screws (5) in light housing.
9-520
