TM 55-1520-240-23-7
9-129.1
DISASSEMBLE MASTER CAUTION PANEL (AVIM)
(Continued)
9-129.1
5.
Remove 16 screws (5) from light housing (6).
6.
Separate light housing (6) from housing (7).
7.
Remove six screws (8) and six nuts (9) from
bottom cover (10). Remove bottom cover (10)
from housing (7).
8.
Remove six screws (11) and nuts (12) from top
cover (13). Remove top cover (13) from housing
(7).
9.
Tag and remove five circuit card boards (14) from
housing (7). Use tag (E264).
10.
Place each circuit card board (14) in a static free
bag. Use bags (E468).
11.
Remove eight screws (15) and nuts (16) from four
pin connectors (17). Remove pin connectors.
12.
Remove four screws (18) and nuts (19) from
brackets (20). Remove brackets.
13.
Remove two screws (21) and nuts (22) from pin
connector (23). Remove pin connector.
14.
Remove four screws (24) and nuts (25) from
brackets (26). Remove brackets.
15.
Remove eight screws (27) from connectors (28
and 29). Remove connectors from housing (7).
16.
Remove four screws (30) and nuts (31) from
terminal (32) and connector (33). Remove
terminal and connector from housing (7).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
9-518
