TM 55-1520-240-23-7
9-119
DISASSEMBLE TROOP WARNING BOX
(Continued)
9-119
NOTE
Procedure is same to remove either
light. To remove lamp only, go to step
11.
9.
Disconnect connector (15) from light (16).
10.
Tag and unsolder wire (17) from connector (15).
Use soldering gun.
11.
Remove two nuts (18), washers (19), and screws
(20).
12.
Remove lamp (23).
13.
Remove light (16).
14.
Remove retainer (21) and lens (22).
15.
On forward box only, tag and disconnect 12 wires
(24) from relay (25) by removing screws (26)
and washers (27). Tape exposed ends. Use
tape (E385).
16.
Remove two screws (28), washers (29), and nuts
(30).
9-453
