TM 55-1520-240-23-7
9-118
REMOVE TROOP WARNING BOX (Continued)
9-118
11.
On forward box (1) only, tag and unsolder four
wires (14) from resistors (15). Tape exposed
ends of wires. Use tape (E385).
12.
On forward box (1) only, tag and disconnect 12
wire terminals (16) from relay (17) by removing
eight screws (18) and washers (19). Tape
exposed ends of wires. Use tape (E385).
13.
Reinstall eight washers (19) and screws (18) on
relay (17).
14.
Remove nut (20) and washer (21) from ground
stud (22).
15.
Tag and disconnect two wires (24). Tape ends.
Use tape (E385). Electrical lead (23) shall stay
on ground stud (22).
16.
Install washer (21) and nut (20) on ground stud
(22).
17.
Carefully route wiring harness (25) clear of box
(1).
18.
Remove pile tape (26) from structure (27) on
both sides of box (1).
19.
Install cover (4) and tighten four screws (3).
9-449
