TM 55-1520-240-23-7
9-98.1
REMOVE OVERHEAD PANELS FROM PANEL
(Continued)
9-98.1
LTG PANEL
4.
Remove LTG panel (17) as follows:
a.
Tag and unsolder four wires (18) from
potentiometer (19). Tape wire ends.
b.
Tag and disconnect wire (20) from receptacle
(21). Tape wire ends.
c.
Tag and remove wire (22) from receptacle
(21) by removing screw (23) and washer (24).
Tape wire end.
d.
Tag and remove four wires (25) from
transformer (26) by removing four nuts (27)
and washers (28). Tape wire ends.
e.
Loosen four screws (29). Remove panel (17)
from panel (3).
9-317
