TM 55-1520-240-23-7
9-77
ASSEMBLE LANDING LIGHT (AVIM)
(Continued)
9-77
21.
Position canopy (46) on rotate mechanism (18)
with wire (47) inside canopy. Install setscrew
(48).
22.
Connect wire (49) to canopy (46) using screw
(50) and washer (51). Remove tag.
23.
Support lamp (52) at canopy (46).
24.
Connect two wires (47 and 49) to lamp (52).
Install two screws (53) and washers (54).
25.
Position NVG or normal lamp (52) in canopy (46).
NOTE
On helicopters with 17 , left landing
light has NVG lamp and lens.
26.
Install retaining ring (55) or NVG lens (55.1) and
three screws (56) and sleeves (57) in canopy
(46). Tighten screws.
FOLLOW-ON MAINTENANCE:
None
END OF TASK
9-262
